105
Extending the Telephone System
115
11 Extending the Telephone System
The internationally approved
GAP
1
standard regulates the compatibi-
lity of handsets and base stations from different manufacturers. As a
result, it is possible to integrate SWITEL devices and devices from
other manufacturers together in one telephone system. It is possible,
however, that some functions are not available.
Registering handsets
Up to 5 handsets can be registered on the base station. All handsets
contained within the scope of delivery of this telephone set are al-
ready registered with the base station.
To complete the registration process, you need the current 4−digit PIN
code
2
;
Before starting to register a handset, switch the base station to Regis-
tration mode.
5 sec.
c
Wait for an acoustic signal: Start
Registration mode
The base station is then in Registration mode for approx. 1 minute.
Continue with the handset. The registration process must be comple-
ted within this one minute period:
M
Open the main menu
-
/
+
REGISTRATION
Select the submenu and
M
confirm it
PIN?
Enter the PIN code
SEARCHING
Flashes until the handset is
registered
When the registration process is completed successfully, you will hear
a confirmation signal, the antenna icon lights up permanently and the
handset is assigned an internal call number which appears in the dis-
play in Standby mode.
Each handset can only be registered on one base station.
Deregistering handsets
To complete the deregistration process, you need the current 4−digit
PIN code;
You cannot complete the deregistration process from the
handset you want to deregister!
Handsets are deregistered via the menu;
M
Open the main menu
-
/
+
BS SETTINGS
Select the submenu and
M
confirm it
-
/
+
DELETE HS
Select the submenu and
M
confirm it
PIN?
Enter the PIN code
HANDSET x
-
/
+
Select the handset to be
M
deregistered and confirm it
DELETE HS
Status
message
The antenna icon flashes in the display of the deregistered handset.
The
REGISTRATION
message also appears.
1
GAP
:
G
eneric
A
ccess
P
rofile = Standard for the interoperation of
handsets and base stations from different manufacturers.
2
The 4−digit PIN code is set to 0000 by default.
Summary of Contents for DC 56 series
Page 32: ...Notizen 32 Notizen...
Page 92: ...Appunti 92 Appunti...
Page 122: ...Notes 122 Notes...
Page 123: ...Notes 123 Notes...
