30
Page
Version 1.1 March 2021
Step 2: Using the Duct Seal, make a small blob and cover the unused antenna hole on the right side of the box
bottom (Part I).
Step 3: Using the Duct Seal, seal the wire channel under the Box Plug on the Solar Bracket Assembly. You can
also seal around the Box Plug as it goes into the Box.
Step 4: Using the Duct Seal, seal the hole underneath the Saucer Lightning Assembly.
Step 5: Using the Duct Seal, seal the holes on the bottom of the box bottom (Part I) but leave one screw hole
open for a vent.
Congratulations! Now go and enjoy all that data coming into your system. And check out the Advanced
Programming manual.
Disclaimer
SwitchDoc Labs, LLC takes no responsibility for any physical injuries and possession loss caused by those
reasons which are not related to product quality, such as operating without following the operating manual and
cautions, natural disasters or force majeure.
SwitchDoc Labs, LLC has compiled and published this manual which covers the latest product description and
specification. The contents of this manual are subject to change without notice.
