15
Page
Version 1.1 March 2021
Step by Step Assembly
You will need to disassemble the unit that you assembled in the WeatherSense Lightning Assembly and Test
and follow the assembly instructions below.
Step 1: Superglue 4 5mm brass inserts into the bottom box (Part I) as in the picture below. Use a screw to help
you position and glue the inserts into the box. Apply glue to the outside of the inserts then push them into the
hole and gently unscrew the screw. If they are too tight to push in, gently pound the screw (with the insert
attached as below) into the bottom box.
