SWIT S-4904R, User Manual

Page: 5 / 12

3. Product Instruction
Transmitter S-4904T
Front view Rear view
⑴、⑵
LED status indicators:
Including Power, Video Signal and Wireless connection condition indicators
⑶
Wireless frequency dial switch
Set frequency range from 0
～
9, in total 10 channels
⑷
SDI in: 3G/HD/SD-SDI input (BNC connector)
⑸
HDMI in: HDMI input (HDMI-A type connector)
⑹
On/Off: Switch the power on/off
⑺
DC in: Support DC 6.5-17V voltage input, 5.5mm/2.1mm. Outside: negative, Inside: positive
⑻
Power installer: To be installed on Gold mount or V-mount cameras
⑼
Antenna
⑽
Battery Plate: Gold mount or V-mount battery plate optional. See details in “7.Battery plate”
⑾
Installation thread
： ： ： ：
1/4”-20 thread. Use the package supplied articulating arm trestle to install the device to the camera.
The description of LED status indicator
Device Indicators Status Description
S-4904T
Power
Constant On Power connected and switched on
Off Power disconnected or switched off
Video
Constant On
Network is connectioned, and there is recognizable
video signal input
Off
Network connection failed and there is no
recognizable video signal input