SWIT S-4904R, User Manual, Page: 6 / 12

Receiver S-4904R
Front view Rear view
⑴
Antenna
⑵
Power installer: V-mount or Gold mount lock for optional. To power through the same battery mounted on
the monitor.
⑶
1/4”-20 threaded hole.
⑷
RSSI
： ： ： ：
Wireless received signal strength indicator
⑸、⑹
LED status indicators:
Including Power, Video Signal and Wireless connection condition indicators
⑺
Wireless frequency dial switch
Set frequency range from 0
～
9, in total 10 channels
⑻
SDI out: SDI output (BNC connector)
⑼
HDMI out: HDMI output (HDMI-A type connector)
⑽
On/Off: Switch the power on/off
⑾
DC in: Support DC 6.5-17V voltage input, 5.5mm/2.1mm. Outside: negative, Inside: positive
⑿
Battery Plate: Gold mount or V-mount battery plate optional. See details in “7.Battery plate”
The description of LED status indicator
Device Indicators Status Description
S-4904R
Power
Constant On Power connected and switched on
Off Power disconnected or switched off
Video
Constant On
Network connectioned, and there is recognizable
video signal output
Off
Network connection failed and there is no
recognizable video signal output
RSSI
0
～
1 LEDs light
The wireless network connection is weak, and the
video noise is visible
2
～
3 LEDs light
The wireless network connection is general, and the
video quality is good
4
～
5 LEDs light
The wireless network connection is strong, and the
video quality is very good