
4. Frequency Dial Switch
4.1 Using ONE set of devices under the same environment
Dial the frequency switch of both transmitter and receiver to the same channel (in the same channel number),
the default channel number is “0”:
S-4904T S-4904R
4.2 Using TWO sets of devices under the same environment
It is suggested that set the dial switch of the first set to channel”0” and the second set to channel “5”
:
S-4904T #1 S-4904R #1 S-4904T #2 S-4904R #2
4.3 Using three sets of devices under the same environment
It is suggested that set the dial switch of the first set to channel”0”, the second set to channel “4” and the third
set to channel “7”
:
S-4904T #1 S-4904R #1 S-4904T #2 S-4904R #2 S-4904T #3 S-4904R #3
Note: 1. Please don’t use more than 3 sets of devices under the same environment to avoid interference.
2. To use multicast, just set several receivers at the same frequency channel as the one transmitter.
5. Build Connection
⑴
Connect the SDI or HDMI video source with the “SDI IN” / “HDMI IN”
port of S-4904T transmitter.
⑵
Connect the “SDI OUT” / “HDMI OUT” port of S-4904R receiver with
monitor or other receiving devices.
⑶
Dial the S-4904T and S-4904R to the same frequancy channel.
⑷
Power S-4904T and S-4904R, they will automatically search the
network, the S-4904R output video signal OSD displayed as Fig1.
⑸
The network will be built after 10-20 seconds, the ”RSSI” of receiver
indicates the wireless network connection status.
⑹
When S-4904R detect the recognizable video signal, ”Video”indicator will light and OSD will dispappear.
Remark: S-4904T support SDI input and HDMI input, and it will automatically detect the connected signal input.
If both SDI and HDMI are connected, S-4904T will give priority to transmit SDI signal.
Fig1
Summary of Contents for S-4904R
Page 12: ...Product Registration Link...