⑻ Video Signal Interface
HDMI-IN：HDMI input (HDMI-A connector)
HDMI-OUT：HDMI output (HDMI-A connector)
SDI-IN1：3G/HD/SD SDI input (BNC connector)
SDI-IN2：3G/HD/SD SDI input (BNC connector)
SDI-OUT：3G/HD/SD SDI output (BNC connector), the monitor choose fixed SDI-IN1 signal to loop
output.
⑼ External interface control
GPI：GPI control socket
USB：For firmware upgrade
⑽ Speaker
Monitor HDMI, SDI embedded audio and analog audio monitoring. (when connecting 3.5mm audio
output, the speaker is off).
Screen display
⑴ Time code（SDI）
Under SDI input, it can display Time code. If no Time code information is detected, it will be displayed as
“TC: UNLOCKED”.
User can set function keys F1～F3 as “Time code” to turn on or off this function
⑵、UMD
Display the source title. Set up the UMD under ‘UMD” submenu.
⑶、AFD（SDI）
User can set function keys F1～F3 as “AFD” to turn on or off this function. If no relevant information is
detected, it will be displayed as “AFD: UNLOCKED”.
⑷、Soft Tally
When connected with TALLY control devices and set TALLY port in GPI, the screen will display soft TALLY
signal, flashing in Red, Green or Yellow. Refer to “Main Menu—5. GPI”.
⑸、Audio
Monitor the audio information. User can set function Keys F1～F3 as “Audio” to turn on or off this
function
The relevant parameters like position, audio channels and blending, etc can be changed under “Audio”
submenu.
06
CAMERA 1
TC
：
00:15:13:07
-09
-20
-48
1 2 3 4 5 6 7 8 9 1011 1213141516
L -20DB 01CH
R -22DB 01CH
(1)
(2)
(3)
(4)
(5)