4、 Function key
To define the F1～F3 function keys
*1
Function keys F1-F3 can be set as the down below functions:
Time code, Zebra, Audio Bar, False Color, AFD, H/V Delay, R/G/B/Mono, Marker, Color Bar, UMD, Audio
Alarm, Focus Assist, Aspect Ratio, Scan Mode, Zoom Mode, Mute, Freeze Frame, Flip Mode, Color Temp.
For example: Set F3 to “R/G/B/Mono” under “Function key” submenu. User can press F3 on the front
panel to adjust the parameters of “R/G/B/Mono”, and the “R/G/B/Mono” will change and follow the
sequence: Blue Only →Red Only →Green Only →Mono →Off.
5、 GPI
User can set GPI pins 1-4 to relevant functions to turn on or off this function.
*1 When “GPI control” is set to “On”, the monitor can be operated through external GPI control unit.
*2 The GPI pins can be set to the down below functions:
Red Tally, Green Tally, Yellow Tally, Aspect Ratio, Scan Mode, Zoom Mode, Mute, Freeze Frame, Flip Mode,
Color Temp, Time code, Zebra, Vector, Audio Bar, False Color, AFD, H/V Delay, R/G/B/Mono, Marker, Color
Bar, UMD, Audio Alarm, Max backlight, Focus Assist.
When connecting the GPI pin with ground, the setted function will be turned on, and goes out when
disconnecting.
Function Key
Exit
F1
F2
F3
F4
Time Code
Focus Assist
Zebra
Max Backlight
F5
Freeze Frame
F6
Scan Mode
*1
GPI
Exit
GPI Control
1Pin
2Pin
3Pin
4Pin
5Pin
6Pin
Off,On
Red Tally
Green Tally
Audio Alarm
UMD
Color Temp
Mute
*1
*2
Example 1
: Under “GPI ” submenu, set “GPI control” to “On”, set “2 Pin”
to “Red Tally”, when the pin 2 of the extenal GPI control unit is connected
with ground, the Tally light will display on the front panel which will
flashes in red around every second. When disconnected, the monitor will
not display tally light information.
Example 2
: Under “GPI ” submenu, set “GPI control” to “On”, set “4 Pin”
to “Scan Mode”, when the pin 4 of the extenal GPI control unit is connected
with ground, the Scan mode will change and follow the sequence: “Normal” →“Overscan”→“Native” .
11
Pin
Pin
GPI
GPI
1
GPI_1
GPI_2
6
NC
NC
NC
GND
5
GPI_4
2
3
7
4
GPI_3
8