SWIT CM-S73H, User Manual, Page: 12 / 19

Set “UMD”:
⑴ Select “Source ID”
(2) The underline flashes as a reminder on the bottom of the first letter. Revolve "MENU" to select the
letters; the letter will follow the sequence of the down below if clockwise revolved:
(3) Press “MENU” to save the current settings letter and then start to set the next letter.
⑷ Repeat step (2) and step (3), max 8 letters are supported.
⑸ Press “Exit” to quit and save the settings.
7. Marker
*1 When “Fit Marker” is “Off”, the size of safety area is benchmarked against the actual display
screen, accounting for 80% ~ 95% of actual display screen. When “Fit Marker” is “On”, the size of
safety area is benchmarked against the area inside the scales marker, accounting for 80% ~ 95%
of the area inside the scales marker.
Example:
6、UMD
UMD Exit
RS485 Address
Position
Display Type
Baud Rate
Parity
Serial Port
1
Size
Normal
Top,Bottom
Color
Red,White,Black,Blue,Green,Yellow
Source ID
38400
Even
RS485
Source ID
CAMERA 1
Marker
Exit
Marker
Marker Select
Safety Area
Fit Marker
Center Marker
Marker Color
Marker Outside
Off,4:3,13:9,14:9,15:9,16:9,1.85:1,2.35:1
Off,80%,85%,90%,93%,95%
Off,On
Off,On
White,Red,Green,Blue,Black,Gray
Off,On
Off,Gray,Black
*1
Aspect ratio: 4:3 Safety Area: 85%
Center Marker: On Fit Marker: Off
Aspect ratio: 4:3 Safety Area: 85%
Center Marker: Off Fit Marker: On
Safety Area Marker Outside
Center Marker Marker Select
12