9. Display
10. System
*1 Source Scan
When set to “On”, after turn on the monitor, the signal will be inspected and follow the sequence
of “SDI1→SDI2→HDMI”.
For example: if channel is selected to SDI1, SDI1-IN has no input, and HDMI has input. When turn
on the monitor, after automatic inspection, SDI1 has no recognized signal, and HDMI has
recognized signal, then the input signal will be HDMI.
When set to “Off”, update model will not be supported.
*2 Logo
When powered on, the screen will display SWIT logo.
*3.*4 Update Driver/ Kernel
⑴ Open the power supply, plug the U disk with upgrading programma into the USB port on the
rear of the monitor；
⑵ Press “MENU” rotary knob, open the main menu, enter the “system” submenu, select
“Driver/Kernel”；
Display
Exit
Waveform
Audio Bar
Vector
Zebra
Focus Assist
Time Code
Histogram
Off
Off,On
Off
Off,On
Off,On
Off
Off,On
Off,On
Off,On
Off,On
Off,On
Off,Blue,Red
False Color
AFD
H/V Delay
R/G/B/Mono
Color Bar
Marker
UMD
Off,On
Off,Blue Only,Red Only,Green Only,Mono
System
Exit
Recall Profile
Save Profile
EDID Switch
Logo
Idle Duration
Update Driver
Factory
,
User1
,
User2
,
User3
User1
,
User2
,
User3
EDID 2.0
,
EDID 1.4
Source Scan
On
,
Off
Odd/Even Frame
Off
On
,
Off
Green Mode
Black Backlight
2Hours
No
,
Yse
Update Kernel
No
,
Yes
*1
*3
*2
*4
⑶ Set the parameter to “Yes”, and press “MENU” rotary knob
to begin upgrading；
⑷ While upgrading, there will be a prograss bar displaying on
the screen (Note: Do not power off when upgrading）；
⑸ After upgraded, the monitor will automatically reboot.
14