Swissvoice Eurit 567, User Manual

Page: 65 / 76

63
20403310en_ba_c0
63
PBX access
Compatibility
You can also connect your telephone to an ISDN private branch exchange.
The functionality is dependent on your PBX type. Contact your network operator
for further information.
Exchange Access Code EAC
You may need to enter an exchange access code (e.g. 0) to allow the public exchange
to assign an external line for external calls or for calling back numbers in the calls list.
Entering the EAC
Procedure:
1. Press the softkey under MENU . Scroll to PBX in the SETTINGS menu and press OK
to confirm.
2. Enter the exchange access code.
Note • After having programmed an exchange access code you do not have to
enter it again in a directory entry. However, if you dial off-hook or in call
preparation you still have to enter the exchange access code manually.
• To give the exchange sufficient time to assign a public line, you may need
to program a “pause” after the exchange access code by pressing and
holding down
.
• For further information, refer to your PBX operating instructions.
Incoming EAC on/off
Some exchanges automatically insert the EAC. Make the necessary setting (on or off) in
the menu
SETTINGS
,
PBX
,
FUNCTIONS
.