background image

55

20403310en_ba_c0

Answer machine (Eurit 577 only)

Remote activation of answer machine 

If you have forgotten to switch your answer machine on, you can do this remotely from
an external telephone. Dial your number and let it ring 12 times. Enter your 4-digit
security PIN and press 

to switch on the answer machine.

PIN alarm

If you enter the remote access PIN incorrectly three times in succession, your telephone
will automatically disconnect the line. The PIN alarm is then activated (indicated by rapid
flashing of the “in operation” display). It is now impossible to remote access your
answering machine until the PIN alarm has been reset by pressing the On/Off key at the
base station.

Operating the answer machine from an external telephone

1. Dial your number. When you hear your outgoing message, press

.

2. Enter your 4-digit security PIN. If there are new messages, these are played back.

You can remotely operate your answer machine using the following keys:

return to main menu

play messages

delete all old messages

switch answer machine on/off

select outgoing message

record new outgoing messages

play menu again

Summary of Contents for Eurit 567













































































Reviews: