Swissvoice Avena 249, User Manual, Page: 94 / 100

92
20406320xx_ba_a0
Compatibility
Your telephone is designed for use in the analogue telephone network and can be opera-
ted on a PBX that supports DTMF dialling and flash signalling. Contact your network ope-
rator for further information.
Access Code
You may need to enter an access code (e.g. 0) to allow the public exchange to assign an
external line for external calls or for calling back numbers in the calls list.
Entering the Access Code
1. Press the softkey under Menu . Select Settings/BS Settings and Exchange Code
and press OK to confirm.
2. Enter the access code.
Note • After having programmed an access code you do not have to enter it again
in a directory entry. However, if you dial off-hook or in call preparation you
still have to enter the access code manually.
• To give the exchange sufficient time to assign a public line, you may need to
program a “pause” after the access code by pressing .
• For further information, refer to your PBX operating instructions.
PBX access