49
7 Interface/Periphery
7.1 Accessories
LG516 Charging
device
LGRA516
Charger with relays and connector for external
antenna
LGL516
Charger with relays, control LED and connector for
external antenna.
LG516C Ex
Charger for DE516C Ex
SG505
Serial interface and charging
PG95
Programming unit including charging device
Caution:
The above listed chargers can only be used for pagers with recharge-
able batteries such as NiCd or NiMH.
Do not insert a pager with an alkaline battery.
DE516C Ex: Contact your dealer to change the accumulator. See
back cover of this manual.
Reset pager
With the following function you have the possibility to reset the pager.
Please proceed as follows:
• Remove battery.
• Insert battery again and press the upper and lower button at the
same time.
• In the middle the text “Factory reset?” is displayed.
• Press the middle button, if you wish to reset the pager.
Under normal circumstances you will never need this function. Never-
theless if the pager shall “hang”, you can reset the pager to make it
work properly again.
Subject to technical change.
45303 DE516 e_und UG 16.11.2005 8:49 Uhr Seite 49
