4.1 Simple mode
If the pager changes back to the stand-by mode, it automatically
provides the simple mode, if activated. In this mode the 3 keys are
programmed with a slight action delay in order to help to avoid
operating errors. The 3 keys have the following functions:
Upper key (1):
In standby mode:
As long as this key is pressed the
status is displayed.
While reading a message:
This key allows to scroll
up within the message.
Middle key (2):
The latest received message is displayed. It is also
displayed, if it has already been read before. If sev-
eral unread messages are stored in the message
folder, the latest message is displayed first, followed
by the remaining unread messages. After some sec-
onds the pager falls back into the standby mode.
Lower key (3):
In standby mode:
As long as this key is pressed,
the logo or the identification text appears.
While reading a message:
This key allows to scroll
down within the message of more than 4 lines. If
a message has been read, the next message is
displayed.
4.2 Comprehensive Mode
By pressing the upper and the lower key simultaneously for at least
3 seconds the pager changes to the comprehensive operation mode.
In the comprehensive operation mode all functions of the pager are
accessible through several menus and submenus.
If the pager is not configured for simple mode, the pager always works
in the comprehensive operation mode. In this case pressing the
middle key in the standby mode displays the menu. All other key
functions remain as it is described in chapter 4.1.
The paragraphs below describe the comprehensive operation mode
in details.
39
45303 DE516 e_und UG 16.11.2005 8:49 Uhr Seite 39
