Swisson ISP-4 User Manual Download Page 12

Page: 12 / 12

Ordering Information

DMX-‐512 Variants

20 10 10

ISP-‐4D-‐DC-‐TERM DMX splitter for DIN rail installation. 1 in, 4 out ports. Input and outputs

optically isolated. Pluggable screw terminals. 10 – 48V DC.

20 10 15

ISP-‐4D-‐DC-‐RJ45A DMX splitter for DIN rail installation. 1 in, 4 out ports. Input and outputs

optically isolated. RJ-‐45, pin configuration according to ANSI E1.11. 10-‐48V DC.

20 10 16

ISP-‐4D-‐DC-‐RJ45B DMX splitter for DIN rail installation. 1 in, 4 out ports. Input and outputs

optically isolated. RJ-‐45, alternative pin configuration. 10 – 48V DC.

DMX-‐512 plus RDM Variants

20 10 20

ISP-‐4R-‐DC-‐TERM

DMX & RDM splitter for DIN rail installation. 1 in, 4 out ports. Input and
outputs optically isolated. Pluggable screw terminals. 10 – 48 V DC.

20 10 25

ISP-‐4R-‐DC-‐RJ45A DMX & RDM splitter for DIN rail installation. 1 in, 4 out ports. Input and

outputs optically isolated. RJ-‐45, pin configuration according to ANSI E1.11.
10 – 48 V DC.

20 10 26

ISP-‐4R-‐DC-‐RJ45B DMX & RDM splitter for DIN rail installation. 1 in, 4 out ports. Input and

outputs optically isolated. RJ-‐45, alternative pin configuration. 10 – 48 V DC.

Summary of Contents for ISP-4












