INSTALLATION MANUAL
MAECUAMAE01
1
ÑMAECUAMAE0117Ó
Page 1: ...INSTALLATION MANUAL MAECUAMAE011 ÑMAECUAMAE0117Ó ...
Page 2: ...ted to the hydraulic electro valve left movement PWR power supply EV3 not used EV4 not used NOTE Use a 1 4 inch nut driver to fix the main cable harness connector to the ECU Dataseed 1 Technical Specifications Dimensions 130x90x40mm Weight 500g without main harness Waterproof IP67 Supply voltage 10 35 Vdc Operative temperature range 20 C 60 C Storage temperature range 30 C 80 C Power consumption 1...
Page 3: ...s shall be considered The positive red wire must be under switch The negative black wire must be connected to a clear and pure negative Do not connect the negative pole to oxidized or painted metallic parts The power supply must be able to provide at least 10A in case of RIGHT and LEFT only Do not connect the device to weak or unstable sources Do not connect the positive red wire to the starter mo...
Page 4: ...ent or vehicle itself The shifting mechanism could move suddenly and cause severe injury or death C The ECU Dataseed must be powered OFF when installing or removing the ECU Dataseed or any other part of the system ATTENTION after the installation of the ECU Dataseed system verify that all the screws bolts nuts and cable connections are tight Verify that all the cables and hoses have been secured t...
