Swisscom Top S324 ISDN, User Manual

Page: 93 / 126

91
Using with a PABX
Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / pabx.fm / 13.10.2003
Using with a PABX
Access code (outside line code)
Prerequisite: If your phone is connected to a PABX you may have to enter an access
code (outside line code) for external calls when first getting started, depending on the
PABX. See the operating instructions for your PABX. You can enter an access code (one
to four digits).
The access code (outside line code) is automatically put in front of the phone number
of the caller in the display and in the call list for incoming calls and also when copying
into the directory. The saved phone number can then be dialled directly from the calls
list (page 44).
Dialling options
The KEYPAD function is used to control specific services by entering strings of characters
and digits.
The KEYPAD function must be set when connecting your device to an ISDN PABX or to a
telephone exchange which uses KEYPAD protocol for controlling. The digits/characters
0–9, *, # are sent as keypad information elements. To find out which information and
codes can be sent, contact your service provider.
Options
You can switch between the settings
Standard dial
(factory default setting),
Auto
keypad and Dial * and # .
Standard dial
After activating
Standard dial
, * and # are not sent while dialling, and entering * and
# will not switch to keypad.
v
Open the menu.
s
Base Settings
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN, if needed (page 61).
s
System settings
Select the menu item and confirm.
s
Access code
Select the menu item and confirm.
~
Enter access code and open the menu.
s
Save entry
Confirm.
OK
OK
OK
OK
OK
OK
i
When dialling manually and when entering directory and emergency/
direct phone numbers, the access code must also be entered.