Swisscom Top S324 ISDN, User Manual

Page: 63 / 126

61
Security settings
Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / security.fm / 13.10.2003
Security settings
Changing the System PIN
The system PIN (Personal Identification Number) is used to protect the following
settings from unauthorised access:
◆
Call charge settings (
v
/
Call Charges
)
◆
Internal and external call forwarding
(
v
Base Settings / Ext. call forw.
or
Int. call forw.
)
◆
Party configurations, security, ISDN, and system settings (
v
/ Base Settings
/
Settings
)
◆
Getting started wizard (
v
/
Base Settings
/
Installation
)
The system PIN is only effective when it is not 0000.
The system PIN is pre-set to 0000 at the factory.
Defining authorisation
You can set different authorisations for all registered devices:
◆ Unrestricted
(set as factory default)
All devices can answer incoming calls and make external/internal outgoing calls.
◆ Incoming only
The devices can only answer incoming calls. External calls cannot be made. Internal
calls can be made. Emergency numbers can be dialled.
v
Open the menu.
s
Base Settings
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
If the current PIN is not 0000: Enter PIN and confirm.
Security
Confirm.
s
Change PIN
Select the menu item and confirm.
~
Enter new system PIN (max. 8 digits, 0 to 9) and
confirm.
~
Repeat the new system PIN and confirm.
a
Return to idle status.
OK
OK
OK
OK
OK
OK
OK
!
Do not forget the new system PIN! If you forget it, the device will require
technical intervention for which a charge will be made. In this case,
contact the Swisscom Hotline.