Swisscom Office 30, Operating Instructions Manual

Page: 115 / 144

20261949en_ba_h0 7
English
Using the extended-feature functions
Enquiry call
You are conversing with one party and wish to make a brief call to another party while
holding the existing connection.
Enter the number for the enquiry, press the
Foxkey under "Enquiry_call".
At the end of your enquiry call press the END
key.
Note If you press the wrong key or replace the handset after terminating the
enquiry call, a continuos ringing tone is emitted for around 10 seconds to
remind you that the first call is still connected. If you lift the handset during
this time you will return to the first call.
Brokering
To switch between the first call and the enquiry call.
Press the Foxkey under "2nd conversation".
Transferring the call
After initiating an enquiry call you wish to connect the two call partners.
Replace the handset.
Conference
After initiating an enquiry call you wish to set up a conference together with your original
call partner.
Press first the MENU key and then the Foxkey
under "Conference".
Note Don’t worry! When you are setting up a conference call, none of your call
partners will be disconnected. The connections will only be disconnected if
the END key is pressed or if the handset is replaced!
Enquiry–call
☛
END
2nd–conversation
MENU
Conference