7
2
0
4
0
7
1
9
6
xx
_
b
a
_
e
3
Multiple repeaters : setting up a cascade configuration
Repeaters can also be used to extend the range in a specific direction using a 2 repeaters
cascade (one repeater in the range of the base, one second repeater in the range of the
first repeater). Using 2 repeaters allows to double the range.
To setup a proper cascade configuration:
• First place the base at the location where you are conducting most of the calls.
• Register the 2 repeaters used for the cascade and then switch them off.
• Then, going to the direction where you want to extend the range for, walk with
the handset until you reach the range limit from the base. At this point step back
for about half the distance, this should be a good place where to locate the first
repeater. Connect the first repeater at the closest main plug, the LED is white on
the repeater.
• Keeping the first repeater switched on, still going to the direction where you want
to extend the range for, walk with the handset until you reach the range limit from
the repeater. At this point step back for about half the distance, this should be a
good place where to locate the second repeater. Connect the second repeater at
the closest main plug, the LED is white on the repeater.
• During a call in cascade mode, the leds on both repeaters will blink white indicat-
ing a call is relayed.
Base
Repeater
Repeater
p
Base
