3
2
0
4
0
7
1
9
6
xx
_
b
a
_
e
3
Startup
Contents of the package
➭
1 Repeater
➭
1 power supply
➭
1 multi-lingual user manual
Easy registration
1. Prepare the base station
• Make sure one handset is registered to the base station
• Switch Ecomode plus mode off (from the handset)
• Switch repeater mode on (from the handset)
• Set base to register mode (by holding down the « registration » or « page » key
for several seconds)
2. Take repeater in operation
• Position the repeater close to the base station
• Plug the main adapter
• The LED on the front of the repeater flashes slowly red (1.5 s/1.5 s)
The repeater enters automatically in association mode
• Wait until the white LED is ON
• The registration is completed
3. Place the repeater at desired location
• If the red LED is flashing quickly, please choose a place with higher signal strength
Note:
In case the repeater registration is failing the repeater red LED will continue to flash
slowly. The easy registration steps should then be repeated.
