Swisscom Aton CLT418ISDN, User Manual

Page: 18 / 76

16
2040522
3en_
ba_b0
Setting up the telephone
Note You can replace the handset in the base station after every call.
Charging is electronically controlled to ensure optimal charging of
batteries in different charge states. Avoid removing the batteries from
the handset for no good reason, since this affects the optimum
charging cycle.
Because your telephone is fitted with a low-radiation mechanism, the
antenna automatically switches off in standby mode and cannot
therefore emit any radiation. Your telephone is delivered with this
function switched on.
You can telephone for up to 12 hours with fully charged batteries.
The handset has a standby time of up to 120 hours.
If the battery charge status has reached its lower limit, the battery
symbol (
) flashes in the display and a warning signal is heard. You
have 10 minutes of talk time left.
The language choice appears. Press to scroll to the desired language and press
to confirm.
An installation assistant guides you then step by step through the setup procedure
for your telephone.
Enter time and date according to the displayed instructions.
Note The installation assistant will re-appear following a reset of the
telephone (reset to default settings).