Swisscom Aton CLT418ISDN, User Manual

Page: 16 / 76

14
2040522
3en_
ba_b0
Setting up the telephone
Your handset will be ready for operation (for making or accepting calls) only once the
batteries have been fully charged for the first time.
The bottom part of the handset contains a battery compartment for housing two
type AAA batteries (microcells).
Press on the top of the
clip and shift it upwards
to remove it.
Slide the battery
compartment cover
downwards (approx.3
mm) and lift.
Insert the batteries in the battery compartment. Make sure the polarity is correct.
Insert the batteries so that the flat end (negative polarity) of the battery is pressing
against the spring. The handset will not function if the batteries are incorrectly
inserted. This may result in damage. Replace the compartment cover by placing it
approximately 3 mm offset and slide it upwards until it clicks into place.