9
First steps
Aton CL401 ISDN / SWZ-EN / A31008-M395-F151-1-2X19 / starting.fm / 7.5.08
Ve
rs
ion 4,
16
.09.
2005
Attaching the belt clip
There are notches for attaching the belt
clip on the side of the handset at the same
height as the display.
¤
Press the belt clip onto the back of the
handset so that the protrusions on the
belt clip engage with the notches.
Opening the battery cover
¤
If fitted, remove the belt clip.
¤
Place your fingertip in the cavity on the
casing and pull the battery cover
upwards.
Placing the handset in the charging
cradle
¤
Plug the charging cradle mains adapter
into a mains power socket.
¤
Place the handset in the charging cra-
dle with the
display facing forwards
.
Should you have any questions and prob-
lems see page 60.
Headset socket
You can connect various headset types
(with 2.5 mm jack connector), including:
HAMA Plantronics M40, MX100 and
MX150 as well as the enclosed headset.
Initial charging and discharging of the
batteries
If the handset is activated, the flashing
battery icon
e
in the top right of the dis-
play indicates that the batteries are being
charged.
During handset operation, the battery
icon indicates the charge status of the bat-
teries (page 1). The correct charge level
can only be displayed if the batteries are
first fully charged
and
discharged.
¤
To do this, leave the handset in the
charging cradle
without interruption
for
seven
hours.
¤
Once the batteries are fully charged,
remove the handset from the cradle
and do not put it back again until the
batteries are fully discharged.
Please note:
u
Always repeat the charging and dis-
charging procedure if you remove the
batteries from the handset and reinsert
them.
u
The batteries may warm up during
charging. This is not dangerous.
u
After a while, the charge capacity of
the batteries will decrease for technical
reasons.
Please note:
– If the handset has turned itself off because
the batteries are flat and is then placed in
the charging cradle, it will turn itself on
automatically.
– Only place the handset in the base station
or charging cradle that is intended for it.
Please note:
After the first battery charge
and
discharge,
you may place your handset in the charging
cradle after every call.
