31
Aton CL401 ISDN / SWZ-EN / A31008-M395-F151-1-2X19 / sms_BRD_neutral.fm / 7.5.08
Ve
rs
ion 4,
16
.09.
2005
SMS (text messages)
Your phone is supplied ready for sending
SMS messages immediately.
Preconditions:
u
Calling Line Identification is enabled for
your phone line.
u
Your network provider supports SMS on
the fixed line network (information on
this can be obtained from your network
provider).
u
The SMS centre number is already
entered.
SMS messages are exchanged between
SMS centres operated by service provid-
ers. You must enter the SMS centre
through which you wish to send and
receive SMS messages into your phone.
You can receive SMS messages from
every
SMS centre that is entered, provided you
have registered with your service provider.
Your SMS messages are sent via the
Service Centr.
that is shown as the
active
send service centre
. However, you can
activate any other SMS centre as the active
send service centre to send a current mes-
sage (page 36).
The following SMS centres are pre-pro-
grammed for Switzerland:
– Centre 1: 062210000* (Swisscom)
Please contact your provider with any
questions relating to the SMS service.
If no SMS service centre is entered,
the SMS menu only contains the entry
Settings
. Enter an SMS Service Centre
(page 36).
Information on writing an SMS can be
found in the appendix:
u
For how to enter text, see page 65.
Rules
u
An SMS can be up to 612 characters.
u
If there are more than 160 characters,
the SMS is sent as a
linked
SMS (up to
4 SMS messages with 153 characters
each).
Please note:
u
From a handset, you can only access
(read/edit/delete) SMS messages that
have been received or sent from an
MSN set up for the handset. To find out
how to assign MSNs to your handset,
u
If your phone is connected to a PABX,
please read page 36.
u
If you wish to receive an SMS via sev-
eral MSNs, you must register each MSN
separately with your service provider.
u
The send/receive MSN must corre-
spond to the number that is registered
at your SMS centre (page 36).
Writing/sending an SMS
Writing an SMS
v
¢
î
New SMS
Select
and
press
§OK§
.
~
Write an SMS.
Sending an SMS
c
Press the talk key
or:
§Options§
Press the display key.
Send
Select and press
§OK§
.
SMS
Select and press
§OK§
.
~
/
s
/
C
Select number with dialling
code (even if you are in that
area) from the directory or
enter directly. For sending
SMS to an SMS mailbox: add
the mailbox ID to the
end
of
the number.
Please note:
When supplied, the access number
(062 210 00 0) for the Swisscom SMS centre
is pre-programmed.
