35
Connection to a PABX
Enter the PIN-code (factory pre-set: 0000).
Enter EIC with the numeric keys and confirm with the
key.
Select another function using the arrow keys or exit the
programming menu with the C-key.
Causion:
If you have stored an Exchange Identification Code you must place
this in front of the telephone numbers that you want to enter in a
memory (telephone numbers for speed dialling, abbreviated
dialling, assistance call function and restriction function).
Remarks:
• You can delete an entered EIC during the programming process by pressing
the C-key.
• The input of an Exchange Identification Code serves only to set the sequence
of numbers after which there must a dialling pause.
Program pause duration after dialling EIC
For the required pause after dialling the corresponding identification codes, you
have the option to program either a short or a long pause (depends on the type of
PABX). In the factory pre-set, the short pause is set (3 seconds). Please also refer
to the PABX operating instructions.
Press the R-key and the redial key at the same time. (The
„P“ for „Programming-mode“ appears in the display.)
Select the function „Pause duration“ using the arrow keys
and confirm with the
key.
Enter the PIN-code (factory pre-set: 0000).
Enter the pause duration using the numeric keys (1 - 9) and
confirm with the
key.
