13
Making telephone calls
Start Automatic redialling
You have dialled a telephone number and the target
subscriber is busy:
Press the R-key and the redial key at the same time. (The
„P“ for „Programming-mode“ appears in the display.)
Press the OK-key.
Replace the handset.
The telephone initiates a pause of up to 30 sec. and then
repeats the dialling process up to 10 times. During the call,
the loudspeaker key lights red.
As soon as the called subscriber answers the call:
Pick up the handset.
Hold conversation.
Remark:
The automatic redialling is also activated if you press the R-key and the redial
key at the same time and afterwards the OK-key while the handset is on-hook. In
the display, the symbols „Auto“ and „Redial“ appear. After 30 seconds the
telephone starts to dial. If the called party answers the call, you can hear him/her
via the loudspeaker. Pick-up the handset or press the loudspeaker key to hold
the conversation.
Stop Automatic redialling
In the idle state, pick up the handset and replace it. The
automatic redialling process is stopped.
