WWW.SWISSMILITARYTIME.CH
InstructIon manual
SM34054 Limited Edition
Calibre ETA E48.341
Thank you very much for buying a SWISS MILITARY BY CHRONO watch. Our watches
are made in Switzerland and bear the I «SWISS MADE» seal of approval. We guarantee
Swiss precision that serves tradition, innovation and competence. Your Limited Edition is
a sporting, multifunctional watch with innovative technology. Apart from showing the
time in an analogue form, it also has various extra digital displays. The following functions
can also be activated by simply pressing the pushers: weather, altimeter, chronograph,
alarm, timer, time zones and thermometer.
Important notice
Only authorised CHRONO AG service centres may be entrusted with any
service work.
Chrono AG
Service Center
Weissensteinstrasse 49
CH-4502 Solothurn
Switzerland
Weather
Changes in the weather are associated with changes in the atmospheric pressure. The
watch measures these changes in pressure and indicates weather trends using the hands.
Depending either on how the weather will develop, the hands point towards plus (good
weather) or minus (bad weather). The digital display also shows the absolute and relative
atmospheric pressure in hectopascal.
More information can be found in section M.
Altimeter
The altimeter is an innovative function that shows the current height above sea level. The
altimeter should be recalibrated regularly to ensure a precise altitude measurement. Set
the altimeter to the effective height of a known point and repeat this procedure for new
values. Changes in the atmospheric pressure due to sudden changes in the weather may
affect the altimeter‘s display, even if the effective height has not changed. The accuracy
of the altimeter calls for an adjustment to the geographical location (hemisphere and
climate zone, section Q).
More information can be found in section L.
Thermometer
When in the thermometer mode, the watch shows the ambient temperature. However, the
watch case is affected by your body temperature when the watch is worn and can lead
to inaccurate results. To ensure an optimum measurement, take the watch off your wrist
and wait for 15-30 minutes.
Contact with water
The watch is waterproof up to a pressure of 10 bar (100 m/330 ft), but is not suitable for
diving. The sensors do not work under water and there is a risk of water getting inside the
watch if you press the red pushers.
Never press the push-pieces under water!
