Fig. 8: B-quick link open and showing O-
ring undone
Fig. 9: Paramotor riser with B-quick link
(to the right-hand side)
Now take the shackle with the stabiliser lines and connect it to the C1 strap on the paramotor
riser (Fig. 11).
Fig. 10: Paramotor riser with B-lines
Fig. 11: Paramotor riser with stabiliser
lines on C1
Next, open the C1 quick link and undo that O-ring too (Fig. 12). Now take the lines out of the
quick link and hang them with the stabiliser lines on the paramotor riser. Fasten the O-ring
and close the C1 quick link on the paramotor riser (Fig. 13).
Fig. 12: C1 quick link on the standard riser
Fig. 13: Paramotor riser with C1 quick link
and both stabiliser and C1-lines
Take the empty quick link off the standard riser and put it in a safe place. You will need it
later on to change over the second riser.
