Fig. 2:
risers hanging up
Check that you have the correct pairs of riser hanging up together before you start to change
them over. You have done this correctly if the brake pulleys are facing in the same direction
(Fig. 3).
Standard riser with
lines
Paramotor riser with
quick link on B
Pulleys on the right-
hand side
Fig. 3:
The two right-hand risers
Begin with the right-hand risers. First, you need to attach all of the lines from the right-hand
standard riser to the right-hand paramotor riser. You then need to attach all of the lines from
the left-hand standard riser to the left-hand paramotor riser. It is important to follow a specific
sequence as described below to do this, so that the lines are not mixed up or twisted.
