45
Fig. 39
(4)
2-1/2'' screws
each side
Fig. 40
2-1/2'' screw
• BOTTOM OF LADDER RAIL •
Top Corner o
f 2'' x 4''
Bottom
Corner
of 2'' x 4'
'
2- 3/4''
From Bottom
(6)
1-1/4''
screws
E X A M P L E O F L A D D E R R U N G I N S TA L L AT I O N
ST
EP
BR
AC
KE
T
(2)
2-1/2'' screws
each joint
Ladder Assembly
(2) 2'' x 4'' x 46-1/4'' Slant Cut Ladder Rails
(5) 2''x 4'' x 17-1/4'' -----Ladder Rungs (4) and Ladder Cap (1)
(1) 5/4'' x 4'' x 20-1/4'' -- Gap Filler
1.
Assemble Ladder
A.
On ladder rails, mark all measurement locations for each side with a pencil. Draw an angle line
connecting measurements for each Ladder Rung alignment.
(Fig. 38)
B.
Align top of Step Bracket with line and screw in place. Install a Ladder Rung at each of the four
locations.
(Fig. 38, 39)
Repeat on other Ladder Rail.
C.
Attach 2'' x 4'' x 17-1/4'' to Ladder Rails using (2) 2-1/2'' screws per side.
D.
Secure Ladder to unit.
(Fig. 40)
Note: The top step should be 11'' below the deck and all steps
should be level.
E.
Screw (2) 2-1/2" screws into the ends of each Ladder Rung through the left and right Ladder Rails.
(Fig. 40)
.
2.
Attach Ladder to Tower by driving four 2-1/2’’ screws through the Ladder Cap and into the Deck Support
as shown in
(Fig. 40)
.
Summary of Contents for Palisade II
Page 51: ...51...
