background image

25

WARNING

Four (4) danger labels have been provided for your safety.  Apply these 

labels to the pool where they are easily visible to all persons using the pool.  
To do this, simply peel the backing off the label to expose the self stick back 
and firmly press to a conspicuous and plainly visible surface on the pool. 

DO NOT REMOVE THE DANGER 
OR WARNING LABELS 
UNDER ANY CIRCUMSTANCES

The manufacturer has provided warning signs to prevent diving and/or jumping into your pool.

Alert all pool users to these signs.

Should you need additional labels for any reason, the manufacturer will supply these labels to you

at your request.  Simply order the desired label by part number either from your local dealer or direct
from the manufacturer.

WARNING LABELS

18

POOL USER WARNING LABELS

19

SAFETY BROCHURES AND EDUCATION PROGRAMS

20

#490090

#490091

#490021

Educational programs and materials, (i.e. seminars, workshops, brochures, videos, instructional guides, etc.) are
available from NSPI, NSPF, other aquatic safety groups, and by private firms. As a means of communicating useful
safety information to pool owners and users industry members are permitted to provide such information to owners and
to request or require owners to sign a statement that they have received, read and will follow the guidelines.

The following books are available through the National Pool & Spa Institute: 

"The Sensible Way To Enjoy Your Aboveground/Onground Swimming Pool"  

...published by the NSPI

"Children Aren't Waterproof" 

...published by the NSPI

"Layers of Protection" 

...published by the NSPI

"Pool and Spa Emergency Procedures For Infant And Children"  

...published by the NSPI

Contact:

APSP

Contact:

NSPF

2111 Eisenhower Avenue

10803 Gulfdale Suite 300

Alexandria, VA 22314

San Antonio, TX 78216

(703) 838-0083 

(210) 525-1227

www.NSPI.org

www.NSPF.org

Summary of Contents for oval 4ft pool





























Reviews: