![background image](http://html1.mh-extra.com/html/swift/sc92f-1600-kent/sc92f-1600-kent_technical-manual_1413867010.webp)
Kents Bottom Farm
Yatton Keynell
Chippenham
Wiltshire
SN14 7BW
United Kingdom
Tel:
44(0) 1249 783000
Fax:
44(0) 1249 783300
Company No:
3636759
Race Cars Designed to Win
DAMPERS
Original fitment dampers are Sachs:
Front
90/28 0.13m/s
Rear
230/90 0.39m/s
BRAKE BALANCE
Set 2 turns to front from central position. Driver can then fine tune on shake down.
For wet conditions adjust 2 turns to rear from preferred dry setting.
BRAKE PADS AND FLUID
Use Mintex M1144 pads, and DOT4 brake fluid.
HUB TORQUES
Front:
140lb/ft
Rear :
180lb/ft
WHEEL TORQUES
60lb/ft.
RACK CLEVIS
Set clevis at 30 degrees to the horizontal.
CHASSIS REPAIR
Chassis repair should only ever be carried out by the original manufacturer on the original jigs.. The
chassis uses specialised tubing and welding processes that must be carried out by Swift.
BUMP RUBBERS
Front rubbers must be cut down to one ring.
Rear rubbers leave as standard.
WHEEL SPACERS
Use wheel spacers on the front only.
CV GREASE
Out board:
80ml
In board:
40ml