PLEASE READ THE INSTRUCTIONS BEFORE OPERATING THIS PRODUCT
If any of the slats are out of alignment, twist the
wand control until the slats are in the closed
position, then continue to twist the wand until all
the slats are fully aligned.
You may feel some resistance and hear a clicking
noise whilst doing so.
MAINTENANCE
The product is low maintenance, however we
recommend that regular visual checks are
completed to ensure that no components have
been damaged, which could result in operating
difficulties and/or cause a safety risk.
To ensure the slats slide smoothly across the
headrail apply some silicone base lubricant spray
to inside of the headrail. If any maintenance is
required we recommend that the work is carried
out immediately by a reputable blind company.
WARNING
Young children can be strangled by loops in pull cords, chains, tapes
and inner cords that operate the product.
To avoid strangulation and entanglement, keep cords out of the reach
of young children.
Cords may become wrapped around a child’s neck.
Move beds, cots and furniture away from window covering cords. Do
not tie cords together. Make sure cords do not twist and create a loop.
Use the wand to draw the slats to either end of the blind.
Twist the wand to tilt the slats in either direction to the
open/closed position.
WAND OPERATION-DRAW
WAND OPERATION-TILT
