YOU SHOULD HAVE
TOOLS REQUIRED
• Screwdriver
• Pencil
• Power-Drill
•
Tape Measure
• Pliers
BRACKETS
SAFETY DEVICES
•
Tie down Safety Clip
CHILDREN CAN
STRANGLE IF A
SAFETY DEVICE IS NOT
INSTALLED. ALWAYS
USE A SAFETY DEVICE
TO KEEP CORDS AND
CHAINS OUT OF REACH
OF CHILDREN.
Fixing Holes
STEP 1
THE INSTALLATION OF THIS
PRODUCT SHOULD BE
CONDUCTED BY SOMEONE
COMPETENT IN DIY.
OUTSIDE RECESS
If the blind is to be fitted
outside the window ensure that
measurement C is the same.
Follow instructions for FACE
FIXING. To calculate C=(A-B)/2.
INSIDE RECESS
TOP FIX to the lintel or FACE FIX
brackets to the window frame.
STEP 2
TOP FIXING
Measure and mark the distance
(D), allowing for obstructions like
handles that protrude into the recess
area. Hold each bracket into place
and mark the hole positions. Fit
each bracket using suitable screws.
Please ensure fixings are suitable for
the wall/surface to which you are
mounting the brackets.
FACE FIXING
Position brackets approx 5cm from
the ends of where the headrail
is to be positioned. If more than
2 brackets are supplied, fit the
additional brackets at equal spacing
across the length of the blind.
Please ensure fixings are suitable
for the wall/surface to which you
are mounting the brackets.
(D)
(A) Width of Blind
(B) Top Fix
(C)
(C)
