background image

2

FB155 / FB240

 

Bergvägen 7 | SE-341 32 Ljungby | Sweden • Tel +46 (0)372-156 00 | www.swepac.com

D

ok

: 101536-

GB  2039

USE

SWEPAC FB 155 / FB 240 

is used to pack ballast under foundations, roadwork 

construction, in pipe and cable trenches, etc. Due to the 

forward / reverse function, the machine is highly suited 

for packing ballast in places with poor access and as a 

complement to larger packing equipment in hard-to-

reach places.

 

USE .......................................................................2

SAFETY INSTRUCTIONS .....................................3

STANDARDS ........................................................3

SIGNS ...................................................................4

TECHNICAL DATA  ..............................................5

METHOD OF OPERATION .................................5

DAILY SUPERVISION ..........................................7

BEFORE STARTING .............................................7

STARTING ............................................................7

AFTER STARTING ................................................8

STOPPING ...........................................................8

DRIVING INSTRUCTIONS ...................................9

TRANSPORTATION ...........................................10

EC DECLARATION OF CONFORMITY...............11

CONTENTS

Summary of Contents for FB240













Reviews: