background image

5

FB155 / FB240

 

Bergvägen 7 | SE-341 32 Ljungby | Sweden • Tel +46 (0)372-156 00 | www.swepac.com

D

ok

: 101536-

GB  2039

FB 240

Net weight .............................................................240 kg   

Base plate W x L .......................................500 x 790 mm

Operational speed approximately ............ca 25 m/min

Permitted inclination ...................................................20°

Centrifugal force ...............................................38,000 N

Vibration frequency ................................................78 Hz

Driving engine ..........................................Honda GX 200

Engine power ........................................................4.1 kW

Engine RPM................................................... ..3400 RPM

Fuel tank volume .................................................3.6 litre

Fuel type ............................Unleaded or alkylate petrol

TECHNICAL DATA 

METHOD OF OPERATION

The machine consists of a base plate with vibrating 

elements and a top-mounted suspended plate. 

The cushioning between the base plate and the 

upper part consists of rubber dampers. The power 

is transmitted from the engine to the vibration 

element via a V-belt which can be adjusted with 

a belt tensioner. The engine V-belt pulley is fitted 

with an integrated centrifugal clutch, which allows 

the engine to be started and run idle without 

the vibrator being connected. The engine is well 

protected against damage in connection with use 

and transportation by a sturdy protective frame 

with a protective panel.

FB 155 

Net weight ..............................................................180 kg   

Base plate W x L .......................................450 x 790 mm

Operational speed approximately ............ca 25 m/min

Permitted inclination ...................................................20°

Centrifugal force ................................................32000 N

Vibration frequency ................................................83 Hz

Driving engine ..........................................Honda GX 200

Engine power .........................................................4.1 kW

Engine RPM ......................................................3400 RPM

Fuel tank volume .................................................3.6 litre

Fuel type ............................Unleaded or alkylate petrol

OIL and FUEL RECOMMENDATIONS

Fuel

Unleaded or alkylate 

gasoline

Engine oil

SAE10W-30

Oil quantity, 

crankcase

0.5 litre

Engine oil change

First oil change after 

50 hours then every 

200 hours of operation. 

Change filter each time.

Vibrating element, 

oil/amount

SAE10W-30

FB 155......0.3 litre

FB 240......0.35 litre

Summary of Contents for FB240













Reviews: