8
FB 270 / FB 280 / FB 300
B00018
1
D
oc: 101542-
GB 2105
Vibrating element
Check for oil leaks regularly. Seal any leaks. NOTE! the
machine must under no circumstances be operated if there
are any indications of leakage.
Note!
The amount of oil in the vibrating element is
0,5 L.
1. Draining / refilling openings
Rubber dampers
Check the condition of the rubber dampers regularly.
Replace damaged dampers.
Yanmar
decompression lever
In cold weather or if the machine has trouble starting, try
opening the decompression valve, then try again.
Remove the front cover to access the decompression valve,
the decompression lever will return to its original position
when the engine starts.
V-belt drive
Check the tension and condition of the V-belt regularly.
Replace a damaged V-belt with a new type according
to the table below.
Machine designation
V-belt type
FB 270
XPA 990 6T43
FB 280
XPA 990 6T43
FB 300
XPA 990 6T43
Charging the battery
If the “Charging” warning light on the control panel
shines red or if the machine is left unused for a long
period, the battery needs to be charged.
This is done by removing the rear cover (1) to allow
access to the battery. Connect the charger cables to the
battery terminals.
1
