15
Maximum horizontal speed: maximum horizontal speed in GPS- speed mode.
[4] Motor idle settings
Adjust the size of the motor after unlocking, disable, indicate not to turn. From very slow to fast,
the speed at which the motor can reach is faster.
[5] Maximum tilt angle: allows maximum tilt angle in all flight modes.
[6] Fence setting (factory default limit is 200 meters high, distance is 500 meters)
Height limit: height limit used to limit the flight height of an aircraft. The user can set the height
of the fence as required and height limiting function on or off.
Distance restriction: a horizontal distance used to restrict the flight of an aircraft. The user can
set the half of the fence as required
Triggering behavior:
The behavior of an aircraft after reaching the boundary of a fence:
The aircraft will not be able to break through the fence and fly freely within the fenced area.
Landing, the vehicle will trigger automatic landing when it reaches the boundary of the fence.
The return of the aircraft to the boundary of the fence will trigger automatic return.
Noted：
ü
The height limit function of the fence is invalid under the attitude stabilization mode.
ü
The distance limit function of the fence is invalid under the attitude stabilization mode and
the attitude fixed height mode.
[7] restore factory settings
Click this button to confirm that all parameters for flight control will be restored to factory
settings.
d.
Real time data
The interface provides real-time display of flight control data and can be used for flight control
fault diagnosis.
Summary of Contents for Splash Drone 3
Page 1: ...1 Flight Control and tuning Manual...
Page 17: ...17...
