11
[1] Compass interface assistance statement.
[2] Calibration prompt area is used to direct and prompt the user compass calibration steps.
[3] Calibration button, click start calibration.
ii.
Calibration method
Click the "start the two sides calibration" button, the yellow light is constant on, and enter
the level calibration. At this time, the aircraft is placed horizontally, the direction of gravity is
counterclockwise rotation of the axis until the LED green light is normal, and enters the
vertical alignment. At this time, the nose down, the direction of gravity axis rotation until
LED, green and yellow alternately flash, that is complete calibration.
After the calibration is successful, the calibration mode will automatically exit and the LED
light will blink normally. If the calibration fails, the LED red light will be on for 3 seconds and
needs recalibration.
Calibration of magnetic compasses requires attention:
ü
When the flight site changes, the magnetic compass needs to be calibrated.
ü
Before calibration, please check if there is strong magnetic interference nearby.
Summary of Contents for Splash Drone 3
Page 1: ...1 Flight Control and tuning Manual...
Page 17: ...17...
