12
Senior
a.
Voltage
The flight control detects battery voltage through the power module and provides low voltage
protection function. The interface is used to set up the low voltage protection function of the
flight control, set the alarm voltage and voltage calibration.
[1] Voltage interface assistance statement.
[2] Low voltage protection settings
Flight control provides low voltage protection triggering behavior: auto l light flashing
[3] Alarm voltage setting
Factory default setting level one alarm voltage is 14.6V, level two alarm voltage is 14.4V.
Level one alarm: when the aircraft battery voltage drops to 14.6V, the rear arm yellow LED
lasts three flashes, and at the same time, the FPV screen will appear the prompt symbol of the
low power return as soon as possible.
Level two alarm: when the aircraft battery voltage drops to 14.4V, the rear arm is quick
yellow LED flash, and at the same time, the FPV screen low power return sign will continue
flashing, the aircraft will automatically drop.
[4] Voltage calibration settings
When the flight detection voltage is not consistent with the actual voltage of the battery, it is
necessary to calibrate the flight control measurement voltage. You need to enter the actual
voltage value of the battery in the "measuring voltage" column, and click "write" to calibrate the
flight control voltage. Ensure that the current voltage shown by the flight control is consistent
with the actual battery voltage.
b.
Flight control self inspection
The interface is used to detect the status of the flight sensors and remote controls, including
Summary of Contents for Splash Drone 3
Page 1: ...1 Flight Control and tuning Manual...
Page 17: ...17...
