Specifications are subject to alteration without notice.
www.swegon.se 9
13 Connection to Ducting
The cooling coils for size 14 Coolers have - if they are to
be connected to a GOLD 08 unit - circular duct connec-
tions fitted with a rubber gasket. The coils designed for
connection to GOLD 14-60 units have rectangular duct
connections with rigidly mounted slip clamps.
The cooling coils for size 18 Coolers have - if they are to
be connected to a GOLD 14-60 - rectangular duct con-
nections with rigidly mounted slip clamps.
included in the supply
accessory
Cooler
For air handling
For end connection wall
For end connection wall
For end connection wall
size
unit
facing the air handling unit
facing the exhaust air duct
facing the exhaust air duct
14
GOLD 08
Inlet end connection wall
Connection frame with
—
with 400 mm dia.
slip-clamp joint,
connection
800x400 mm
1
14, 18
GOLD 14-60
Connection frame with
Connection frame with
—
slip-clamp joint,
slip-clamp joint,
1000x400 mm
1000x400 mm
14
BCEA/BASIC 004
Supplied without end
Supplied without end
Connection frame with
connection wall
connection wall
slip-clamp joint, 850x350
Sealing plate for BCEA/BASIC
mm (TBXZ-10850353)
18
BCEA/BASIC 006
Supplied without end
Supplied without end
Connection frame with
connection wall
connection wall
slip-clamp joint, 1100x500
mm (TBXZ-1110050)
1) This end connection wall does not have a circular connection; this
minimises the pressure drop. If connection is made to a circular
exhaust air duct, use a conical adapter as a transition piece.
13.1 for Cooler 14 and 18. all items are supplied in kit form.
2) A sealing plate is required for connection to the BCEA/BASIC 004
because the COOLER has smaller dimensions.
The cooling coils and cooling agent coolers for size 4-60
Coolers have - if they are to be connected to a GOLD -
rectangular duct connections with rigidly mounted slip
clamps.
If the cooling coils are to be connected to the Basic air
handling unit, they are incorporated with other compo-
nents as standard cooling coils for the Basic.
14 electrical Data
14.1 Cooling unit
The Cooler unit has pre-wired internal electrical connec-
tions and is test run prior to delivery.
All electrical equipment is housed in the electrical cubicle
behind the inspection panel.
Incorporated components:
• Safety isolating switch.
• Control circuit fuse.
• Contactors and motor protection/fuses for
compressors and pumps.
• Terminal blocks for internal/external connections.
• Circuit card for necessary functions and
communication with hand-held micro terminal.
gB.Cooler.inSt.060501
