21
OPERATION
STORAGE
NOTICE!
Do not store the sweeper with weight on the brush. Weight will deform the
bristles, destroying the sweeping effectiveness. To avoid this problem, place the sweep
-
er on blocks or use storage stands.
Do not store polypropylene brushes in direct sunlight. The material can deterio
-
rate and crumble before the bristles are worn out.
Keep polypropylene brush material away from intense heat or flame.
•
Clean the unit thoroughly, removing all snow, dirt and grease.
•
Inspect for visible signs of wear, breakage or damage. Order any parts required and make
the necessary repairs to avoid delays upon removal from storage.
•
Tighten loose nuts, capscrews and hydraulic connections.
•
Coat exposed portions of the cylinder rods with grease (if so equipped).
• Lubricate grease fittings.
•
Seal hydraulic system from contaminants and secure all hydraulic hoses off the ground to
help prevent damage.
•
Do not store unit with weight on brushes. Place the unit on blocks or use storage stands.
•
Store unit in a dry and protected place out of direct sunlight. Leaving the unit outside will
materially shorten its life.
Additional Precautions for Long Term Storage:
• Touch up all unpainted surfaces with paint to avoid rust.
REMOVAL FROM STORAGE:
• Remove cover.
• Wash unit and replace any damage and/or missing parts.
• Lubricate grease fittings.
• Check hydraulic hoses for damage and replace as necessary.
LIFT POINTS
Lifting points are identified by lifting decals where required. Lifting at other points is un
-
safe and can damage attachment. Do not attach lifting accessories around cylinders or in any
way that may damage hoses or hydraulic components. See Diagram
•
Attach lifting accessories to unit at recommended lifting points.
•
Bring lifting accessories together to a central lifting point.
•
Lift gradually, maintaining the equilibrium of the unit.
WhEN LIFTING DECALS ARE NOT PRESENT, VERIFY ThAT
LIFTING ACCESSORIES ARE SECURELY ATTAChED AND UNIT IS STABLE
BEFORE LIFTING.
Summary of Contents for 240 series
Page 2: ...2...
Page 4: ...4 THIS PAGE IS INTENTIONALLY BLANK...
