17
OPERATION
DUMPING
(240 SERIES STANDARD SWEEPER ONLY)
Empty the bucket by raising the sweeper above
the container, then dump using the prime mover tilt controls.
(241 & 242 SERIES PRO SWEEPERS ONLY)
The 241 and 242 Series sweepers are
equipped with a high dump floor. Empty the debris by raising the sweeper directly above the
container and reversing the auxiliary hydraulic flow to the sweeper. This will extend the cylin
-
ders on the high dump floor, therefore dumping the collected material.
DANGER! Avoid electrical shock. Stay away from overhead wires.
BEFORE OPERATING SWEEPER:
•
Adjust brush pattern for optimum sweeping performance.
• Be sure you are in a safe area, away from traffic or other hazards.
•
Check to make sure the attachment is securely latched to the attachment mechanism on
your prime mover.
•
Complete daily maintenance checklist. (See Maintenance & Service Section)
• Remove all property that could be damaged by flying debris from sweeping area.
•
Be sure all persons not operating the sweeper are clear of sweeper discharge area.
•
Always wear proper apparel and PPE (personal protective equipment) for your work site.
WhILE OPERATING SWEEPER:
•
When operating sweeper, adhere to all government rules, local laws and other professional
guidelines for your sweeping application.
•
Avoid excessive downward pressure on brush sections to prevent excessive wear. A 2 to 4 inch
(5-10 cm) wide pattern is sufficient for most applications. Ensure that motor and bearing plates are
equally adjusted to prevent uneven wear pattern.
•
Before exiting the prime mover, lower the attachment to the ground, apply the brakes, turn
off the prim mover’s engine and remove the key.
• Minimize flying debris - use slowest rotating speed that will do the job.
•
Keep hands, feet, hair and other loose clothing away from all moving parts.
•
Leave all shields and safety equipment in place when operating sweeper and primer mover.
•
Be aware of the extra weight and width a sweeper adds. Reduce travel speed accordingly.
Keep in mind the center of gravity changes when an attachment is installed.
•
When traveling on rough terrain, reduce speed to avoid “bouncing” the sweeper. Loss of
steering can result.
•
Never sweep toward people, buildings, vehicles or other objects that can be damaged by
flying debris.
•
Only operate sweeper from the operator’s station of the prime mover. Seat belt fastened
and protective glasses worn. Only operate controls while the engine is running.
•
Operate sweeper slowly in open area, check for proper operation of all controls and all
protective devices. Report any needed repairs.
Summary of Contents for 240 series
Page 2: ...2...
Page 4: ...4 THIS PAGE IS INTENTIONALLY BLANK...
