swaploader SL-212, Parts And Operation Manual

Page: 24 / 88

Section II: Installation
2.0.INS.SL-212
HYDRAULIC TANK INSTALLATION
1. Select a location to mount the
hydraulic tank. Reference Fig. H or
Pg. 5-11 for the suggested location
of the hydraulic tank to the rear of
the control valve assembly on the
left-hand side of the truck. The
hydraulic hoses have been sized for
the tank to be mounted in this
general area. The tank can be
located on the right-hand side or
behind the cab, if necessary, which
means longer hoses may be
required.
2. Drill four (4) holes for 1/2” diameter
bolts (provided) in the mount angle
of the hydraulic tank (two per angle)
and the frame rails of the truck
chassis. Mount the hydraulic tank
and install the hydraulic filter. Install
the hydraulic return hose and the
hose barb fitting between the filter
and the control valve assembly as
shown on
Pg. 5-9 . The hose length
can be shortened if necessary.
Secure the hose to the barb fittings
with the hose clamps provided.
Figure H
2-6