GB
11
b). Feed the service arm (24) into the
switching cradle (25)
c). Screw with hexagonal bolt (22) and check
nut (23), tighten the check nuts (23) to such an
extent that the service arm could be moved.
2. Connect the right service arm according to
the described method.
3. Protective arches (26) on both Handle
guard are always assembled using 2 bolts
with cross groove (27).
2
．
Table assembly
Depending on the split wood length, the table
board can be fixed in three heights - 580mm,
770mm and 1060mm, insert the table board to
the required holders (28). Secure the table
board by the locking lever (29) on both sides,
table locking levers are fixed in every
assembly position.
3
．
Lift adjusting
