GB
10
1. Size of the logs to be split
The log size may be three heights- 580 mm,
770 mm and 1060 mm during adjusting table
board.
The figure shows the maximum log sizes that
can be split.
The diameter of the log is indicative: a small
log can be difficult to split if it has knots or a
particularly tough fiber. On the other hand, if
the wood has regular fibers it is not difficult to
split logs with diameter greater than the
maximum shown.
It is important not to insist
when the log does not split on the first
attempt, as the pump may be damaged by
the overheating of the oil when the
machine is made to work under the
maximum stress in the attempt to split
excessively hard wood.
2. Recommended oils
We recommend use of the following oils for
the hydraulic cylinder.
SHELL TELLUS T22
ARAL VITAM GF22
SP ENERGOL HCP22
MOBILE DTE 11 OR equivalent
DO NOT USE OTHER GRADE OILS
3. Application conditions
This log splitter is a home use model. It is
designed for operating under ambient
temperature b5
0
C and 40
0
C and use
at altitudes no more than 1000mm. The
surrounding humidity should less than 50% at
40
0
C. It can be stored or transported under
ambient temperatures between -25
0
C and
55
0
C.
ASSEMBLY AND OPERATION
Warning! For your own safety, do not connect the log splitter to the power source until the
machine is completely assembled and you read and understand the entire instruction
manual.
Warning! Never use the log splitter if it is not in perfect order or if it needs servicing. Before
starting work, check correct functioning of all the safety devices.
Assembly
1. Assembly of Handle guard
a). Unscrew hexagonal bolt(22) and check nut
(23)with wrench, .
