sWaP Active, User Manual

Page: 24 / 28

23
sWaP Signature
&
Active user guide www.s-w-a-p.co.uk
Contents
Security Setup
Contains options related to the secure use of your
sWaP watch.
1 From the clock face, tap Menu or press the lower
button.
2 Tap (twice, if necessary).
3 Tap
Security Setup .
The menu options will be shown:
•
SIM Lock
when enabled, causes your SIM card to
request a valid PIN code whenever your sWaP watch,
or any other phone in which it is installed, is switched
on. You are given only three attempts to unlock the
SIM card and then it permanently locks itself until a
PUK code is entered (available on request from your
network provider).
• Phone Lock when enabled, locks your sWaP watch
and requests its own PIN code (different to the SIM PIN
code - 1122 as standard) before use. Use the
Change
Password
option to alter the phone PIN code.
• Auto Keypad Lock allows you to choose a period of
inactivity, after which your sWaP watch screen will lock.
You can choose from 5 secs,
30 secs, 1 min or 5 mins of inactivity.
Once locked, you need to press the lower button and
then tap your stylus on a displayed target to unlock
your sWaP watch.
•
Fixed Dial
allows you to define one or more phone
numbers which may be dialled from your sWaP watch.
When the Fixed Dial Mode is then enabled, only those
numbers can be dialled. This feature is subject to
support from your service provider.
• Barred Dial allows you to define one or more phone
numbers which you wish to prevent being dialled from
your sWaP watch. When the Barred Dial Mode is then
enabled, those numbers are barred from being dialled.
This feature is subject to support from your SIM and
service provider.
•
Change Password
allows you to change three types
of PIN code or password: Your SIM’s main PIN code,
your SIM’s secondary PIN2 code or your sWaP watch’s
own password code (1122 as standard).
Choose the code that you wish to change, enter
the old code and then enter the new code twice, as
confirmation.
Restore Factory Settings
Allows you to return all options to their factory
conditions and reboot your sWaP watch.
1 From the clock face, tap Menu or press the lower
button.
2 Tap (twice, if necessary).
3 Tap
Restore Factory Settings .
4 Enter the sWaP watch password (1122 as standard)
and tap
Ok
.
5 Tap Yes to confirm.