sWaP Active, User Manual

Page: 12 / 28

11
sWaP Signature
&
Active user guide www.s-w-a-p.co.uk
Contents
MMS messages
MMS messages are structured in a similar way to slide
show presentations. Each message consists of one or
more slides, with each slide able to contain text, an
image, an audio file, a video clip, a file attachment
or any combination of these. When the message is
played, each slide and it’s contents are shown in order.
You can optionally adjust the timing of the slides, for
instance, to keep showing an image until a clip of
music has finished playing.
Note: MMS messages require a GPRS connection as
part of your service provider agreement. Also, not all
mobile phones can accept or display MMS messages.
You must also choose the correct initial settings to
match your network. Please see
MMS connection
configuration at the end of this MMS section.
Writing an MMS message
1 From the clock face, tap Menu or press the lower button.
2 Tap (twice, if necessary).
3 Tap
MMS , then tap Write Message . A series of blank
fields will be shown. Each has a different function:
1 -To; 2 -Cc (copy); 3 -Bcc (blind copy); 4 -Subject;
5 -Edit content
Tap on a field that you want to use, and then tap Edit .
For fields 1 , 2 and 3 you can enter any number of
phone numbers and/or email addresses.
Field
4
is the message Subject and will invoke the
standard text editor.
Field 5 is where you create and determine the content.
When you tap Edit content for field 5 for the first
time, you will see the text editor for the first slide.
4 Enter/edit your text and then tap Option .
To add an item to the current slide, tap Add Image ,
Add Audio
,
Add Video
or
Add Attachment
.
In each case, tap
Phone
or
Memory Card
to choose
the location of the item. Your sWaP watch applications
use
Phone storage as standard, however, this can be
changed within each application (the memory card has
a much larger capacity).
You will then see the folders located within the chosen
storage area, e.g. Images, Audio, Photos, Video, etc.
Tap the appropriate folder name to view the contents.
Tap the required item to add it to your slide.
5 For each item type, repeat step 4. Remember that you
can only have one of each item type per slide. If you
add a second image to a slide, it will overwrite the first
one.
6 If necessary, add one or more new slides to
accommodate multiple items of the same type. From
the text editor, tap
Option and then tap either Add
Slide Before or Add Slide After . You will now see the
blank text editor for the new slide. It is not necessary
to have text on every slide. Repeat steps 4 and 5 to
populate the new slide.
7 To change between slides, tap Option and then tap
either
Previous Slide
or
Next Slide
, as appropriate.
8 When you have completed the slides you can see how
they will play. Tap Option and then tap Preview . If
necessary, you can change the timing. Tap Option and
then tap Slide Timing . Use the editor to change the
time (in seconds) that each slide is displayed.
9 Once the message is complete, tap Option and then
tap Done . You will now see the initial group of fields
where the addressing is performed.
If not already done, enter the recipient
phone numbers and/or email addresses and then tap
Done .
10 You can now choose to Send Only , Save and Send
or Save to Drafts .
If you did not enter any recipients, the only option will
be
Save to Drafts .
Reading an MMS message
1 From the clock face, tap
Menu
or press the lower button.
2 Tap (twice, if necessary).
3 Tap
MMS , then tap Inbox . The list of received MMS
messages will be shown, each listed with either the phone
number or the name (if in the Phone book) of its sender.
The prefixed envelope icon will be shown closed for
unread messages and open for previously viewed ones.
4 Tap the required message to open it.
5 Tap
Option to view the range of actions available to you:
• Reply allows you to compose and send a response to
the original message.
•
Reply by SMS
allows you to contact the sender via
SMS.
• Reply All allows you to send a response to the sender
and all of the original recipients.
• Forward allows you to send the message to one or
more new recipients without editing.
• Delete and Delete All allow you to keep your Inbox
clear of clutter.
•
Properties
allows you to view the addressing details,
the subject name and file size of the message.
• Use Details allows you to use the addressing details
of the message.
MMS connection configuration
Before you can use MMS for the first time, you must
ensure that the MMS settings are correct for your
network connection.
1 From the clock face, tap Menu or press the lower button.
2 Tap (twice, if necessary).
3 Tap
MMS .
4 Tap
Message Settings
.
5 Tap Server Profile .
6 Tap the appropriate network provider name.
7 Tap
Activate Protocol and then tap Yes to confirm.
This process is required only once, you are now ready
to use the MMS application.